Common Errors and Problems on Exterior Wall Painting ?>

Common Errors and Problems on Exterior Wall Painting

Although painting works is agreeably a task that can be performed by any individual, there are always mistakes that are difficult to avoid especially if you are not a professional in this field of work. The best solution in order to solve these issues is to identify and remember these errors in order for you to be able to watch out on your next project. Determining the cause of these problems will also help you to avoid and prevent such things from happening during and after your painting works.

Common exterior wall painting mistakes and problems usually happen when you have overlooked or have given less importance on one or two things. This is committed while you are in the process of painting. In some cases, the mistakes occur due to the lack of preparations. This must be given a great deal of importance as it contributes to the efficacy and success of the project. Below are some of the errors you need to watch out and avoid on your painting works.

  • Cracking – this is a sign that you have put too much paint on the surface of the wall. This is why it is very important to control the amount of paint you put on the exterior wall. Too much paint will not provide any advantages to its durability and visual appeal. When it comes to painting, make sure to apply the adequate quantity with each layer in order to ensure that such problem does not occur in the future. This type of error usually takes place on DIY projects. This is normal if the person who is conducting the painting job is not familiar with this stuff. A simple yet effective method of preventing this from happening is to wipe off extra paint on the side of the container every time you dip the brush or roller.
  • Peeling – although this is normally caused by the weather condition, proper construction, painting, and maintenance of your exterior walls may play a vital role in the prevention of such problem. The common cause of this problem is the accumulation of moisture on the surface of the walls, especially those that have holes where water could be trapped.
  • Inter-Coat Peeling – the separation of the newly applied coat to the old layer is a clear sign of a weak bond between the two coatings. In most cases, this is the outcome of poor cleaning prior to the application of the new material. Dirt is among the common culprits that can greatly affect the bond of the two separate layers of painting material. Although this may seem to be a simple problem which can be easily solved prior to the application of the paint, many individual fail in providing a good maintenance and cleaning job on their exterior walls. Another problem that also contributes to this type of error is when the primer is left hanging on the exterior wall for a long period of time before the desired paint color is applied. This will cause separation of the two painting materials due to tiny foam matters that are quite small to notice.

Painting your exterior walls poses more challenges than your interior walls. However, you can do it well if you are careful enough to avoid the common mistakes that were previously cited.

Comments are closed.